IMPORTANT
To prevent the pyrotechnic components from being
permanently deactivated or triggered (airbags or
pretensioners), wait for at least 3 minutes after disconnecting
the battery. |
IMPORTANT
To prevent the pyrotechnic components from being
permanently deactivated or triggered (airbags or
pretensioners), wait for at least 3 minutes after disconnecting
the battery. |
STRIPPING
I - STRIPPING PREPARATION OPERATION
- Disconnect the battery (see Battery: Removal - Refitting)
(80A, Battery).
- Remove:
- the dashboard (see 57A, Interior equipment,
Dashboard: Removal - Refitting, page 57A-1) ,
- the glovebox (see 57A, Interior equipment,
Glovebox: Removal - Refitting, page 57A-14) .
II - STRIPPING OPERATION FOR PART
CONCERNED
- Remove:
- the bolts (1) ,
- the air duct (2) .
- Remove:
- the bolts (3) ,
- the passenger front airbag (4) .
- Press:
- on the clips (6) on side (5) ,
- on the side air vent at (6) .
- Press on the clips (7) on both sides.
- Remove the centre air vent (8) .
- Remove the front air vent (10) .
- Remove the side air vent (11) .
REBUILDING
I - REBUILDING OPERATION FOR PART
CONCERNED
- Refit:
- the passenger front airbag (4) ,
- the bolts (3) ,
- Torque tighten the passenger front airbag bolts (8
N.m).
- Refit:
- air duct (2) ,
- the bolts (1) ,
- the side air vent (11) ,
- the front air vent (10) ,
- the trim (9) ,
- the centre air vent (8) ,
- the side air vent.
II - FINAL OPERATION.
- Refit:
- the glovebox (see 57A, Interior equipment,
Glovebox: Removal - Refitting, page 57A-14) ,
- the dashboard (see 57A, Interior equipment,
Dashboard: Removal - Refitting, page 57A-1) .
- Connect the battery (see Battery: Removal - Refitting)
(80A, Battery).
|