Renault Koleos Service Repair Manual: Rear final drive coupler computer: Removal - Refitting

Renault Koleos Service Repair Manual / Transmission / Rear axle / Rear final drive coupler computer: Removal - Refitting

Rear axle

REMOVAL

I - REMOVAL PREPARATION OPERATION

  • Disconnect the battery (see Battery: Removal - Refitting) (80A, Battery).
  • Remove the glovebox (see Glovebox: Removal - Refitting) (57A, Interior equipment).

II - OPERATION FOR REMOVAL OF PART CONCERNED

Rear axle

  • Disconnect the connector (1) from the electric coupler computer.
  • Remove:
    • the bolts (2) from the electric coupler computer,
    • the electric coupler computer (3) .

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

  • Refit:
    • the electric coupler computer,
    • the bolts of the electric coupler computer.
  • Torque tighten the electric coupler computer bolts (10N.m).
  • Connect the connector to the electric coupler computer.

II - FINAL OPERATION.

  • Refit the glovebox (see Glovebox: Removal - Refitting) (57A, Interior equipment).
  • Connect the battery (see Battery: Removal - Refitting) (80A, Battery).
    Rear final drive coupler: Removal - Refitting

    Driveshafts

    See More:

    Renault Koleos Service Repair Manual > Rear lower structure: Rear floor front cross member: Description
    There is only one way of replacing this part: partial replacement. I - COMPOSITION OF THE SPARE PART II - PART FITTED Partial replacement WARNING If the mating faces of the parts to be welded are not accessible, make EGW plug welds to replace the original resistance welds (see MR 400). III - POSITI ...

    Renault Koleos Owners Manual

    Renault Koleos Service Repair Manual

    © 2018-2024 Copyright www.rkoleos.com
    0.0059