Renault Koleos Service Repair Manual: Lower engine tie-bar: Removal - Refitting

Renault Koleos Service Repair Manual / Engine and peripherals / Engine mounting / Lower engine tie-bar: Removal - Refitting

M9R

Engine mounting

REMOVAL

I - REMOVAL PREPARATION OPERATION

  • Position the vehicle on a two-post lift .
  • Remove the engine undertray.

II - OPERATION FOR REMOVAL OF PART CONCERNED

Engine mounting

  • Remove:
    • the lower engine tie-bar bolt (1) from the lower engine tie-bar support,
    • the bolt (2) of the lower engine tie-bar from the front axle subframe,
    • the lower engine tie-bar.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

  • Refit:
    • the lower engine tie-bar,
    • the lower engine tie-bar bolt on the front axle subframe,
    • the lower engine tie-bar bolt on the lower engine tie-bar support.
  • Torque tighten in order:
    • the lower engine tie-bar bolt on the front axle sub-frame (110 N.m),
    • the lower engine tie-bar bolt on the lower engine tie-bar support (155 N.m).

II - FINAL OPERATION

  • Refit the engine undertray.

2TR

Engine mounting

IMPORTANT Wear protective gloves during the operation.

REMOVAL

I - REMOVAL PREPARATION OPERATION

  • Position the vehicle on a two-post lift.
IMPORTANT To prevent the vehicle from falling, lash it to the vehicle lift using a strap.

II - OPERATION FOR REMOVAL OF PART CONCERNED

Engine mounting

  • Remove:
    • the engine tie-bar bolt (1) on its support.
    • the bolts (2) from the engine tie-bar on the gearbox,
    • the rear support of the engine,
    • the engine tie-bar bolt (3) from the subframe,
    • the engine tie-bar .

REFITTING

REFITTING OPERATION FOR PART CONCERNED

  • Refit:
    • the engine tie-bar,
    • the engine tie-bar bolt from the subframe,
    • the rear support of the engine,
    • the engine tie-bar bolts on the gearbox,
    • the engine tie-bar bolt from its mounting,
  • Torque tighten:
    • the engine tie-bar bolt on the subframe (110 N.m),
    • the engine tie-bar bolts on the gearbox (110 N.m),
    • the engine tie-bar bolt on its support (110 N.m).
    Right-hand suspended engine mounting: Removal - Refitting

    Transmission

    See More:

    Renault Koleos Service Repair Manual > Diesel injection: Fuel temperature sensor: Removal - Refitting
    M9R IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair.   IMPORTANT Use the diagnostic tool before any operation is carried out on the injection circuit to check: that the rail is not under pressure, that the fuel temperature is not ...

    Renault Koleos Owners Manual

    Renault Koleos Service Repair Manual

    © 2018-2022 Copyright www.rkoleos.com
    0.0058