Renault Koleos Service Repair Manual: Rear screen: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Remove:
  • the tailgate trim (see Tailgate trim: Removal - Refitting) (73A, Non-side opening elements trim),
  • the rear screen wiper arm (see Rear screen wiper arm: Removal - Refitting) (85A, Washing - Wiping),
  • the tailgate locking switch (see Tailgate locking switch: Removal - Refitting) (87C, Opening element management).
• Disconnect the heated rear screen wiring connector and the aerial connector as well as the earths located against the rear screen.
• Protect the edges of the rear screen using masking tape.

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Begin cutting the cement bead.

REFITTING

I - REFITTING PREPARATIONS OPERATION

• For the preparation and the bonding (see Window bonding: Description) (Technical Note 560A, 54A, Windows).

II - REFITTING OPERATION FOR PART CONCERNED

• Refit the rear screen mouldings (1) .
• Use the correct size of cement bead.
• Bond the rear screen (this operation requires two people).
• Respect the following clearances and shut lines:
  • rear screen - roof,
  • rear screen - rear wings.

III - FINAL OPERATION.

• Connect the heated rear screen wiring connector and the aerial connector as well as the earths located against the rear screen.
• Refit:
  • the tailgate locking switch (see Tailgate locking switch: Removal - Refitting) (87C, Opening element management),
  • the rear screen wiper arm (see Rear screen wiper arm: Removal - Refitting) (85A, Washing - Wiping),
  • the tailgate trim (see Tailgate trim: Removal - Refitting) (73A, Non-side opening elements trim).