Renault Koleos Service Repair Manual: Clutch thrust bearing: Removal - Refitting

Renault Koleos Service Repair Manual / Transmission / Clutch / Clutch thrust bearing: Removal - Refitting

6-SPEED MANUAL GEARBOX

Clutch

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair.

REFITTING

I - REMOVAL PREPARATION OPERATION

  • Position the vehicle on a two-post lift.
IMPORTANT To prevent the vehicle from falling, lash it to the vehicle lift using a strap.
  • Remove the gearbox.

II - OPERATION FOR REMOVAL OF PART CONCERNED

Clutch

  • Remove:
    • the bolts (1) from the clutch thrust bearing,
    • the clutch thrust bearing (2) .

REFITTING

I - REFITTING PREPARATION OPERATION

  • Always replace the clutch thrust bearing bolts.

II - REFITTING OPERATION FOR PART CONCERNED

  • Refit:
    • the new clutch thrust bearing,
    • the new clutch thrust bearing bolts.
  • Torque tighten the clutch thrust bearing bolts (21 N.m).

III - FINAL OPERATION.

  • Refit the gearbox.
    Pressure plate - Disc: Removal - Refitting

    Manual gearbox

    See More:

    Renault Koleos Service Repair Manual > Front axle components: Front brake disc: Removal - Refitting
    Note: Brake discs cannot be reground. If there is excessive scoring or wear, they will need to be replaced. When replacing a brake disc, be sure to replace the disc on the opposite side. When replacing brake discs, you must replace the brake pads. REMOVAL I - REMOVAL PREPARATION OPERATION Position ...

    Renault Koleos Owners Manual

    Renault Koleos Service Repair Manual

    © 2018-2023 Copyright www.rkoleos.com
    0.0051