Renault Koleos Service Repair Manual: Proximity radar: Removal - Refitting

Renault Koleos Service Repair Manual / Electrical equipment / Parking distance control / Proximity radar: Removal - Refitting

FRONT AND REAR PROXIMITY RADAR

REMOVAL

I - REMOVAL PREPARATION OPERATION

Note: The operations for removing and refitting the front and rear proximity radars are identical.
  • Remove the front bumper (see Front bumper: Removal - Refitting) (55A, Exterior protection) or the rear bumper (see Rear bumper: Removal - Refitting) (55A, Exterior protection).

II - OPERATION FOR REMOVAL OF PART CONCERNED

WARNING The distance control radars are fragile. Handle with care as the external part cannot withstand impacts.

Front bumper

Electrical equipment

Rear bumper

Electrical equipment

  • Disconnect the connectors (1) from the proximity radar.

Electrical equipment

  • Unclip the proximity radar at (2) .
  • Remove the proximity radar (3) .

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

  • Clip the proximity radar onto its support.
  • Connect the proximity radar connectors.

II - FINAL OPERATION.

  • Refit the front bumper (see Front bumper: Removal - Refitting) (55A, Exterior protection) or the rear bumper (see Rear bumper: Removal - Refitting) (55A, Exterior protection).
    Parking distance control buzzer: Removal - Refitting

    Parking distance control computer: Removal - Refitting

    See More:

    Renault Koleos Service Repair Manual > Diesel injection: Crankshaft position sensor: Removal - Refitting
    M9R IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift . Remove: the engine undertray the front right-hand wheel the front right-hand wheel arch liner the ...

    Renault Koleos Owners Manual

    Renault Koleos Service Repair Manual

    © 2018-2025 Copyright www.rkoleos.com
    0.0057