Renault Koleos Service Repair Manual: Headlight washer jet: Removal - Refitting

HEADLIGHT WASHERS WITH BLADE

REMOVAL

I - REMOVAL PREPARATION OPERATION

• Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).
• Remove the front bumper (see Front bumper: Removal - Refitting) (55A, Exterior protection).

II - OPERATION FOR REMOVAL OF PART CONCERNED

• Remove the clip (1) from the supply pipe.
• Disconnect the supply pipe.
• Unclip the headlight washer jet clip (2) .
• Remove the headlight washer jet support (3) .

• Remove the headlight washer jet (4) from the front bumper.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

• Fit the headlight washer jet to the front bumper.
• Refit:
  • the headlight washer jet support,
  • the headlight washer jet clip.
• Connect the supply pipe.
• Refit the supply pipe mounting clip.

II - FINAL OPERATION.

• Refit the front bumper (see Front bumper: Removal - Refitting) (55A, Exterior protection).

Front screen washer jet: Removal - Refitting

REMOVAL

OPERATION FOR REMOVAL OF PART CONCERNED

• Unclip the windscreen washer jet (1) using the (Car.1363).
• Disconnect the pipe from the windscreen washer jet.
• Attach the pipe for the windscreen washer jet using adhesive tape so that the windscreen washer jet pipe does not fall into the scuttle panel half-grille.

REFITTING

REFITTING OPERATION FOR PART CONCERNED

• Connect the pipe for the windscreen washer jet.
• Clip on the windscreen washer jet.