Renault Koleos Service Repair Manual: Outer rear wheel arch: Description

Renault Koleos Service Repair Manual / Panelwork / Rear upper structure / Outer rear wheel arch: Description

I - COMPOSITION OF THE SPARE PART

Rear upper structure

II - PART FITTED

Rear upper structure

(X1) =15 mm

WARNING If the mating faces of the parts to be welded are not accessible, make EGW plug welds to replace the original resistance welds (see MR 400).

III - POSITIONING OF LOCAL ELECTRICAL EARTHS

Rear upper structure

WARNING To avoid damaging the vehicles electric and electronic components, the earths of any wiring harness near the weld area must be disconnected.

Position the earth of the welding machine as closely as possible to the weld area (see MR 400).

See More:

Renault Koleos Service Repair Manual > Engine mounting: Lower engine tie-bar: Removal - Refitting
M9R REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift . Remove the engine undertray. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the lower engine tie-bar bolt (1) from the lower engine tie-bar support, the bolt (2) of the lower engine tie-bar from the front a ...

Renault Koleos Owners Manual