I - DESIGN OF THE STRUCTURAL COMPONENT
The special feature of this part it that it concurrently serves two functions:
II - AREA TO BE CUT FOR PARTIAL REPLACEMENT
Cutting line (1) shows the area in which it is possible to make a cut. III - ASSEMBLY METHOD FOR A PARTIAL REPLACEMENT Only the connections which are specific to the partial replacement by cutting are indicated.
If there are other issues regarding access to mating faces, the various replacement options are described in the basic instructions for structural bodywork repair (see MR 400).
Line (2) on the diagram shows the partial replacement and an EGW butt weld. |
Renault Koleos Service Repair Manual > Mechanical component controls: Clutch circuit: Bleed
ND5 or ND8 Bleed in the event of: dead travel, pedal at mid-travel, pedal to the floor, poor gear changing. I - PRECAUTIONS DURING REPAIR Risks relating to contamination. The hydraulic clutch system is very sensitive to contamination. The risks caused by contamination are: impossible to change gears ...