Renault Koleos Service Repair Manual: Bulkhead seal: Removal - Refitting

Renault Koleos Service Repair Manual / Chassis / Steering assembly / Bulkhead seal: Removal - Refitting

LEFT-HAND DRIVE

Steering assembly

REMOVAL

I - REMOVAL PREPARATION OPERATION

  • Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).

Steering assembly

  • Remove the cover (1) from the steering column.

Steering assembly

  • Remove the universal joint cover (2) (do not keep).
  • Set the wheels straight ahead.

Steering assembly

  • Remove:
    • the universal joint bolt (3) (do not keep),
    • the universal joint nut (do not keep),
    • the universal joint from the steering box.

II - OPERATION FOR REMOVAL OF PART CONCERNED

Steering assembly

  • Unclip the bulkhead seal (5) at (4) using a flat-blade screwdriver.

Steering assembly

  • Remove the bulkhead seal.

REFITTING

I - REFITTING PREPARATION OPERATION

  • Always refit the universal joint bolt and cam nut.

II - REFITTING OPERATION FOR PART CONCERNED

  • Refit the bulkhead seal.

III - FINAL OPERATION.

Steering assembly

  • Observe the direction of fitting for the universal joint cam nut and bolt.

Steering assembly

  • Check that the universal joint is in the correct position.
  • Refit:
    • the universal joint,
    • the new universal joint bolt,
    • the new universal joint nut.
  • Tighten to torque the universal joint bolt on the steering box (39 N.m).
  • Refit the steering column cover.

RIGHT-HAND DRIVE

Steering assembly

REMOVAL

I - REMOVAL PREPARATION OPERATION

  • Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment).

Steering assembly

  • Remove the cover (1) from the steering column.

Steering assembly

  • Remove the cover (2) from the universal joint (do not keep).

Steering assembly

  • Remove:
    • the universal joint bolt (3) (do not keep).
    • the universal joint nut (do not keep),
    • the universal joint from the steering box.

II - OPERATION FOR REMOVAL OF PART CONCERNED

Steering assembly

  • Unclip the bulkhead seal (5) at (4) using a flat-blade screwdriver.

Steering assembly

  • Remove the bulkhead seal.

REFITTING

I - REFITTING PREPARATION OPERATION

  • Always replace the universal joint bolt and cam nut.

II - REFITTING OPERATION FOR PART CONCERNED

  • Refit the bulkhead seal.

III - FINAL OPERATION.

Steering assembly

  • Observe the direction of fitting for the universal joint cam nut and bolt.

Steering assembly

  • Check that the universal joint is in the correct position.
  • Refit:
    • the universal joint,
    • the new universal joint bolt,
    • the new universal joint nut.
  • Tighten to torque the universal joint bolt on the steering box (39 N.m).
  • Refit the steering column cover.
    Steering box gaiter: Removal - Refitting

    Intermediate shaft: Removal - Refitting

    See More:

    Renault Koleos Service Repair Manual > Diesel injection: Injector rail: Removal - Refitting
    M9R IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair.   IMPORTANT Use the diagnostic tool before any operation is carried out on the injection circuit to check: that the rail is not under pressure, that the fuel temperature is not ...

    Renault Koleos Owners Manual

    Renault Koleos Service Repair Manual

    © 2018-2024 Copyright www.rkoleos.com
    0.0057