I - PREPARATION OPERATION FOR CHECK Position the vehicle on a two-post lift. Remove the wheel . II - CHECKING OPERATION FOR PART CONCERNED
Position the Palmer tool (1) to measure the disc thickness.
Measure the thickness of the disc at 4 points in order (90º apart). Compare the values with those recommended by the manufacturer . III - FINAL OPERATION Replace the discs if necessary . Refit the wheel. |
Renault Koleos Service Repair Manual > Control - signals: Rotary switch: Removal -
Refitting
REMOVAL I - REMOVAL PREPARATION OPERATION Set the wheels straight ahead. IMPORTANT To prevent the pyrotechnic components from being permanently deactivated or triggered (airbags or pretensioners), wait for at least 3 min after disconnecting the battery. Disconnect the battery (see 80A, Battery, Batt ...