FK0 or FK8

| IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair. |
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
| IMPORTANT
To prevent the vehicle from falling, lash it to the
vehicle lift using a strap. |
- Remove the engine undertray.
- Drain the automatic gearbox (see 23A, Automatic
gearbox, Automatic gearbox oil: Draining - Filling,
page 23A-11) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove:
- the sump bolts (1) ,
- the sump (2) ,
- the sump seal,
- the sump magnets.
REFITTING
I - REFITTING PREPARATION OPERATION
- Always replace:
- the sump bolts,
- the sump seal.
- Clean the magnets.
II - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the sump magnets,
- the new seal on the sump,
- the sump,
- the sump bolts,
- Torque tighten the oil sump bolts (8 N.m).
III - FINAL OPERATION.
- Top up the automatic gearbox (see 23A, Automatic
gearbox, Automatic gearbox oil: Draining - Filling,
page 23A-11) .
- Refit the engine undertray.
|