COMBINATIONS FOR REPLACING WELDED STRUCTURAL PARTS IN ACCORDANCE WITH IMPACT SUSTAINED
1st Degree
2nd Degree
3rd Degree
1st Degree
2nd Degree
I - FIRST DEGREE REAR IMPACT
II - SECOND DEGREE REAR IMPACT
III - THIRD DEGREE REAR IMPACT
Consumables - products Vehicle: Parts and consumables for the repair Consumables for mechanical repair:
Consumables for bodywork repair:
|
Renault Koleos Service Repair Manual > Exterior protection: Front side door protective
strip: Removal - Refitting
REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Heat the edges (1) of the front door moulding using a heating gun. Note: Make sure that the body is not damaged. Protect the door rabbet using masking tape. Unclip the rear section of the moulding (2) by pulling on the lever arm using the (Car. 1597). ...