Renault Koleos Service Repair Manual: Airbag computer: Removal - Refitting

Electrical equipment

IMPORTANT To prevent the pyrotechnic components from being permanently deactivated or triggered (airbags or pretensioners), wait for at least 3 min after disconnecting the battery.

REMOVAL

I - REMOVAL PREPARATION OPERATION

  • Disconnect the battery (see 80A, Battery, Battery: Removal - Refitting, page 80A-3) .
  • Remove the centre console (see Centre console: Removal - Refitting) (57A, Interior equipment).

II - OPERATION FOR REMOVAL OF PART CONCERNED

Electrical equipment

  • Disconnect the airbag computer connectors (1) .
  • Remove:
    • the airbag computer bolts (2) ,
    • the airbag computer bolt (3) ,
    • the airbag computer.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

  • Refit:
    • the airbag computer,
    • the airbag computer bolt,
    • the bolts from the airbag computer.
  • Torque tighten:
    • the airbag computer bolt (3) (7 N.m),
    • the airbag computer bolts (2) (25 N.m),
  • Connect the airbag computer connectors.

II - FINAL OPERATION.

  • Refit the centre console (see Centre console: Removal - Refitting) (57A, Interior equipment).
  • Connect the battery (see 80A, Battery, Battery: Removal - Refitting, page 80A-3) .
    Airbags and pretensioners: Recycling - Destruction

    Driver's frontal airbag: Removal - Refitting

    See More:

    Renault Koleos Service Repair Manual > Tyre pressure monitor: Tyre pressure monitor receiver: Removal - Refitting
    TYRE PRESSURE SENSOR REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the front or rear wheel (on the side concerned) (see 35A, Wheels and tyres, Wheel: Removal - Refitting, page 35A-1) , the front w ...

    Renault Koleos Owners Manual

    Renault Koleos Service Repair Manual

    © 2018-2020 Copyright www.rkoleos.com
    0.0111