Renault Koleos Service Repair Manual: Outer rear wheel arch: Description

Renault Koleos Service Repair Manual / Panelwork / Rear upper structure / Outer rear wheel arch: Description

I - COMPOSITION OF THE SPARE PART

Rear upper structure

II - PART FITTED

Rear upper structure

(X1) =15 mm

WARNING If the mating faces of the parts to be welded are not accessible, make EGW plug welds to replace the original resistance welds (see MR 400).

III - POSITIONING OF LOCAL ELECTRICAL EARTHS

Rear upper structure

WARNING To avoid damaging the vehicles electric and electronic components, the earths of any wiring harness near the weld area must be disconnected.

Position the earth of the welding machine as closely as possible to the weld area (see MR 400).

See More:

Renault Koleos Service Repair Manual > Front lower structure: Front side member: General description
IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies. Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general in ...

Renault Koleos Owners Manual